J7-1160

NuWave Oven Pro Plus, with 3" Extender Ring! - #1160

The perfect oven for heating vinyl parts!

The NuWave Oven Pro Plus uses conduction heat, just like a conventional oven, convection heat, which circulates hot air around, and infrared heat, which penetrates food (or your vinyl parts), cooking on the outside and inside at the same time. The NuWave Oven Pro Plus allows you to bake, broil, barbecue, roast, grill, steam, sear, and air-fry all in one convenient appliance.

Here are some tips when using the oven:
  • When heating vinyl always use the Extender Ring. You want the heating element (which is on the top) to be as far away from the vinyl as possible to prevent from getting too hot. This also means you won't need the metal rack when using it for vinyl as it will raise it too close to the heating element.
  • Place a small white blanket or towel inside to cover the base of the oven. When placing all the vinyl in the oven make sure none of the parts are touching the sides or each other. Start with a test part first making sure your temperature and timer are correct.
  • Laying the head flat on its side or proping it up around the neck to lay it on the back of the head is also recommended so the top of the head is farther away from the heat.
  • No need to preheat this oven, just set it to 260-265°F and bake for 8 minutes. Using an oven thermometer is also highly recommended to make sure any oven you use stays at the correct temperature. Never leave your doll unattended while baking.
This oven comes with an elevated cooking rack. The 3" stainless steel extender ring (which is in use in the photos) is also included!

The Pro Plus lets you cook at any temperature between 100°F and 350°F in 1-degree increments. It also features a new, shatter-resistant dome.

Dimensions:
*12 inches in diameter
*15.5 inches wide & 15.5 inches tall on the outside (with extender ring)

Power: 1500 Watts, Amps: 12.5

THIS ITEM CANNOT BE SHIPPED INTERNATIONALLY!
Click here to open more information and/or photos for this item.